|
Originally Posted by Kelley Baggett
How You Can Apply and Benefit From Planned Over-Reaching
The basic tenet is that instead of always looking at each workout as a seperate "fatiguing" session, followed by a seperate "recovery" session of a day or two of rest, begin thinking in terms of weeks. In other words, you have one, two or three weeks which are "fatiguing." Think of this time period the same way some people think of one workout. you accumulate fatigue the whole time, you never "completely" recover. You might make gains but you're never really completely recovered. Then you have another one or 2 weeks in which you train with reduced frequency, volume, or intensity and allow recovery to take place. I favor keeping intensity fairly high, cutting volume by at least half, and slightly lowering frequency. in any event the overall training stress is lower.
The main benefit of the higher volume phase isn't the gains you make on it, but the gains you make when you switch to a lower volume phase.
Accumulation and Intensification
You can also alternate between cycles of incomplete vs complete recovery which is often called accumulation/intensification. Version A I described above (training with full recovery), will work wonderfully when transitioning from a period of increased loading. In other words, accumulate fatigue and train frequently for a while and then transition into a period of time where you train with full recovery between sessions for a while. Say you train 3 x per week for 3-4 weeks and then once every 4 days for 4 weeks. Your gains will be out of this world during the 2nd phase because you heighten your ability to adapt in the first phase. That works very well.
Examples
There are numerous ways we can incorporate a loading/unloading scheme. At it's most basic level a loading period of 2 or more consecutive workouts will be followed by an unloading period of one or more days. An example of this is a simple "block loading" scheme often practiced by endurance athletes that can also be used successfully by others. In fact this is a scheme used in many university team sports. Here we might train hard with weights, sprints, plyos, etc. on Monday, Wednesday, and Friday and do conditioning on Tuesday and Thursday. We then rest completely on saturday and sunday. By Friday the athlete will be worn down and performance very well may have regressed over the course of the week. Yet by having 2 consecutive days off (Saturday and Sunday), we allow a lot of that fatigue to dissipate. Thus, the body supercompensates and the athlete goes into Monday with enhanced ability - for a few weeks anyway.
Generally speaking, anymore then 3-4 weeks consecutive loading will fail to bring about gains unless a one week unloading period is inserted. The body will tolerate 3 such 3/1 blocks of loading/unloading before a longer recovery period is necessary. This means that we'd do 3 consecutive 3/1 cycles before taking 2-3 weeks of training at a lower intensity.
Should I Seek Out Performance Regression?
The intensity of the loading period will vary as well. During loading periods it's ok for some regression to take place but no more then 10%. That means if your vertical jump is 30 inches you can train yourself to a 3 inch decrease and when you recover fully it'll rebound back up above 30. The same thing goes for your strength etc. Remember, the greater the decrease in function the greater the rebound above baseline during the unloading period. There is one caveat here however. The more regression that takes place the longer your unloading period will need to be. If you train to the point of big time (10%) regression, you will need a 2 week rather then 1 week unloading period.
Example of Volume Phase Transitioning Into Intensification Phase for a Football Player
Here is a setup I used recently for an athlete preparing for several football tryouts and combines. His lower body strength levels were more then adequately in place but he was coming off a mass gain phase and needed quite a bit of specific on the field speed work, wanted to drop some fat, and needed to increase his upper body strength.
Phase I- high volume/high frequency
This phase consisted of 2 consecutive 3 weeks load/ 1 week unload schemes. The loading portion looked something like this:
Mon- AM: starts, short sprints, agility drills, position specific drills - ~500 yards total. PM: Weights- 3 x 3 at 80% squat, RDL.
Tues- Conditioning- 100 yds x 15 with 30 second rest intervals
Wed- AM:Plyo- speed drills- 4-6 sets depth jumps/ 1 position specific agility drill/ 4 sets straight leg sprints/ 4 sets 60 yard buildups- PM: Maximum Strength Upper Body Training mainly on the bench press
Thurs- Conditioning- 100 yds x 15 with 30 second rests
Friday- AM: start technique, maximum speed sprints and flying 20's, agility drills, position specific drills- 500 yards total. PM: Strength Training - Clean- 3 x 3 85%/Squat 3 x 3 85%/ Glute Ham- 3 x 3
Saturday- AM- Agility technique, buildups, Upper Body strength enduance focusing on the bench press
Sunday- Off
He'd follow that for 3 weeks and then unload for 1 week. The unloading period consisted of 1/2 the volume of on field work on Monday and Friday and elimination of plyo, speed, agility work on Wednesday.
After about 6 weeks of training, it was obvious to me he had got about all he was gonna get from this scheme. He seemed a little burned out and he complained of sore joints. I knew that this just meant he was slightly over-reached and his perfomance would rebound up big time once we tapered into a lower volume phase. He's always been able to transfer functional ability into technical ability. From experience we knew that as his vertical jump goes so does everything else and as his shoulder press and incline press goes so does his bench press. We ended up dramatically lowering the overall lower body volume. On upper body we got him away from the bench press for a while and worked on his weak points. The routine ended up looking like this:
Phase II - Low Volume Intensification
Session 1- LB
Depth Jump, standing triple, one leg hops unto box, - 4-6 sets each x 3-5 reps
Session 1- UB
incline DB Press, Row, Heavy Tricep, Rear delt - 4-6 sets of 5-8 reps each
Session 2 LB
on the track with 60 yd build ups to 90%, 50 yd bounding, lateral hurdle hops, squat runs x 10 seconds. 4-6 sets each
Session 2 UB
Push Press or Push jerk, Pull-up, Bicep, Tricep- 4-6 sets of 3-8 reps each.
Setup
Session 1 LB
off
Session 1 UB
off
Session 2 LB
off
Session 2 UB
Therefore, he was getting 4 days rest between bodypart workouts and 8 days between like sessions. This allows him near full recovery and he was able to set records nearly every workout for a month long period which coincided perfectly with the timing of his workouts and tryouts. EMS was also used on his legs to maintain his strength. It's important to note that the gains from this phase weren't just made from this phase itself, but they were made and set-up in the previous phase as well.
|
getting ready for football
Linear Mode
